CLI Commands
SLS survivability
954 Avaya G450 CLI Reference
set deny
Use the
set deny
command to permit or deny access to an outbound trunk in SLS.
Syntax
set deny {yes | no}
Note:
Note:
The default value is
no
(access permitted).
User Level
read-write
Context
>
Example
To prevent a station from originating an outgoing analog loop-start trunk call:
G450-001(sls-dial-pattern <dialed-string>)# set deny yes
Done!
Related Commands
set insert-digits (dial-pattern)
set insert-digits (dial-pattern)
Use the
set insert-digits
command to specify the digits to be inserted at the beginning of
the dialed string for an outbound call in SLS.
Syntax
set insert-digits
digits
Summary of Contents for G450 Manager
