Administer Communication Manager
Issue 7 January 2005
227
IP Network Region Screen
2. Complete the fields as described in ‘‘Administration for Network Connectivity for Avaya
Communication Manager, 555-233-504.’’
Note:
Note:
It is strongly recommended to use the defaults in the screen. However, for the
RTCP Enabled and RSVP Enabled fields, the entry should be n (no).
3. If the network region of the G700 (1 in this example) is different from that of the S8500 or
S8700 CLAN board(s), you must interconnect the two regions.
Press NextPage twice to display page 3, of the Inter Network Region Connection
Management screen.
This screen shows the source region (1) and the first 15 destination network region
numbers. (Pages 4–19 show destination regions 16–250).
change ip-network-region 1
Page 1 of 19
IP NETWORK REGION
Region: 1
Location:
Home Domain:
Name:
Intra-region IP-IP Direct Audio: yes
AUDIO PARAMETERS
Inter-region IP-IP Direct Audio: yes
Codec Set: 1
IP Audio Hairpinning? y
UDP Port Min: 2048
UDP Port Max: 3028 RTCP Reporting Enabled? n
RTCP MONITOR SERVER PARAMETERS
DiffServ/TOS PARAMETERS
Use Default Server Parameters? y
Call Control PHB Value: 34
Audio PHB Value: 46
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
Audio 802.1p Priority: 6
AUDIO RESOURCE RESERVATION PARAMETERS
H.323 IP ENDPOINTS
RSVP Enabled? n
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
Keep-Alive Count: 5
