Upgrading the S8300A
Issue 7 January 2005
267
Linux Migration - Backup Status screen
!
CAUTION:
CAUTION:
The screen will show Backup is finished when the backup is completed.
However, also verify that the message, Backup Successful also appears in the
last line. If any error messages appear stating that the backup failed, follow the
normal escalation procedures.
Replacing the S8300A with the S8300B Media Server
To remove the S8300A and insert the S8300B
1. On the Maintenance Web Interface, under Server select Shutdown Server.
2. Select the Delayed Shutdown option and uncheck the "Restart server after shutdown,"
checkbox.
3. Click the Shutdown button.
Click OK to confirm.
4. When the OK to Remove LED on the S8300 faceplate goes on steady, it is safe to remove
the S8300.
!
CAUTION:
CAUTION:
Be sure to wear a properly grounded ESD wrist strap when handling the S8300
Media Server. Place all components on a grounded, static-free surface when
working on them.
5. Loosen the two thumb screws on the S8300 faceplate.
