Connecting telephones and adjunct systems
396 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
●
If you are not sure of the type of AC power being provided, contact a qualified service
person.
●
Do not allow anything to rest on the power cord.
Do not locate this product where the cord will be abused by persons walking on it.
●
Do not overload wall outlets and extension cords as this can result in the risk of line or
electric shock.
●
Disconnect the cords on this product and refer servicing to qualified service personnel
under the following conditions:
- The power supply cord or plug is damaged or frayed
- Liquid has been spilled into it
- Exposed to rain or water
- Dropped or the housing has been damaged
- Exhibits a distinct change in performance
- Operates abnormally when following the operating instructions
Using the P333T-PWR switch
The P333T-PWR Power over Ethernet Stackable Switch can be used to power 46xx series IP
telephones in addition to providing a 10/100 megabits per second Ethernet connection. The
switch can form part of a stack with the G700 Media Gateway or members of the P330
stackable switching system.
!
CAUTION:
CAUTION:
The Avaya P333T-PWR switch does not contain any user-serviceable
components inside. Do not open the case.
!
CAUTION:
CAUTION:
The P333T-PWR switch can be used only indoors and in a controlled
environment.
The P333T-PWR switch has 24, 10/100 Base-T ports, each of which can supply up to 16.5
watts using the internal power supply and operates on a 100–240 volts AC, 5.3 amperes, 50/60
hertz power source with the option of using the 44~57 volts DC, 15 amperes to boost the inline
power.
The P333T-PWR switch can be placed in a wiring closet or on a flat, stable surface like a desk.
Screws are provided for mounting in a standard 19-inch rack.
