Installing an IG550 Integrated Gateway with the J-Web Quick Configuration interface
82 Installing and Configuring the IG550 Integrated Gateway
●
set interfaces dl
<#>
unit 0 dialer-options pool
<pool#>
where
<#>
is the number, from 0 to 149, for the dialer and
<pool_name>
is the name of
the pool and is the same pool name assigned to the umd0 interface earlier.
For example, type:
set interfaces dl1 unit 0 dialer-options pool denver1,
where dialer
1
is also assigned
the
denver1
dialer pool, and is therefore the dialer for the modem interface.
●
set interfaces dl
<#>
unit 0 dialer-options dial-string
<dial_string_1>
where
<#>
is the number, from 0 to 149, for the dialer,
<dial_string_1>
is the phone
number that the modem dialer can use to dial out.
For example, type:
set interfaces dl1 unit 0 dialer-options dial-string 93038885315,
where dialer
1
is
assigned the phone number
93038885315
to dial out.
●
set interfaces dl
<#>
unit 0 dialer-options incoming-map
accept-all
where
<#>
is the number, from 0 to 149, for the dialer and the dialer will accept all
incoming calls.
For example, type:
set interfaces dl1 unit 0 dialer-options incoming-map accept-all
, where dialer
1
will
accept all incoming calls.
●
set interfaces dl
<#>
unit 0 no-keepalives
where
<#>
is the number, from 0 to 149, for the dialer.
For example, type:
set interfaces dl1 unit 0 no-keepalives
, where dialer
1
will not send keepalive
messages to the accessing host computer. Keepalive messages show continued active
status.
●
set interfaces dl
<#>
unit 0 family inet address
<IP_address1>
/30
destination
<IP_address2>
where
<#>
is the number, from 0 to 149, for the dialer,
<IP_address1>
is the incoming
IP address of router’s umd0 modem interface and
<IP_address2>
is the outgoing IP
address over the umd0 modem interface.
For example, type:
set interfaces dl1 unit 0 family inet address 10.6.151.249/30 destination
10.6.151.250,
where dialer
1
uses
10.6.151.249
as the incoming IP address from the
modem interface and sends
10.6.151.250
as the outgoing IP address.
●
set access profile
<access_profile_name>
client
<client_name>
chap-secret "
<chap_secret_string>
"
Summary of Contents for IG550
Page 1: ...Installing and Configuring the Avaya IG550 Integrated Gateway 03 601554 Issue 2 January 2008 ...
Page 10: ...What procedure you should use 10 Installing and Configuring the IG550 Integrated Gateway ...
Page 176: ...Recovering passwords 176 Installing and Configuring the IG550 Integrated Gateway ...
Page 196: ...196 Installing and Configuring the IG550 Integrated Gateway Index ...
