Setting up pre-installed software
Issue 1.0 September 2003 25
Step System
prompt
Action
4
The Solaris Installation
Program
The Solaris installation
program is divided into a
series of short sections where
you'll be prompted to provide
information for the
installation. At the end of
each section, you'll be able
to change the selections
you've made before continuing.
About navigation...
- The mouse cannot be used
- If your keyboard does not
have function keys, or they do
not respond, press ESC; the
legend at the bottom of the
screen will change to show the
ESC keys to use for
navigation.
Press F2 to acknowledge the screen.
5
Identify This System
On the next screens, you must
identify this system as
networked or non-networked,
and set the default time zone
and date/time.
If this system is networked,
the software will try to find
the information it needs to
identify your system; you will
be prompted to supply any
information it cannot find.
To begin identifying this
system, press F2.
Press F2 to acknowledge the screens.
6
Host name:
Enter the host name for the Avaya IR system
and press F2.
7
Networked
[ ]Yes
[ ] No
If you plan to connect your system to a
network, position the cursor between the
Yes
brackets using the arrow keys. Press Enter. An
X appears in the brackets to indicate your
selection. Press F2.