Installation
28 Avaya IR R1.2 Installation
Step System
prompt
Action
21
Time zones
[ ] Eastern
[ ] Central
[ ] Mountain
[ ] Pacific
[ ] East-Indiana
[ ] Arizona
[ ] Michigan
[ ] Samoa
[ ] Alaska
[ ] Aleutian
[ ] Hawaii
Select your time zone and press F2.
22
Date and time:
date time
Year (4 digits):
year
Month (1-12) :
month
Day (1-31) :
day
Hour (0-23) :
hour
Minute (0-59) :
minute
Verify that these values for year, month, day,
hour, and minute are correct. If any values
need to be changed, position the cursor in the
appropriate field and type the correct value.
Press Enter to move between field. When
done, press F2.
The system displays the time zone information
you entered, similar to the following:
23
Time zone: US/Mountain
Date and time: 2002-07-03
10:38:00
Review the information to make sure it is
accurate and press F2 to continue. If the
information is not correct, press F4 and correct
the information starting with the region prompt.
24
Root password:
Enter the root password to be used on the
system
.
25
Re-enter your root password.
Root password:
Enter the root password again.
26
System identification is
completed.
Setting netmask of eri0 to
XXX.XXX.XXX.X
Setting default IPv4 interface
for multicast: add net
224.0/4: gateway XXXXX
syslog service starting.
Print services started.
volume management starting.
Jul 3 10:48:56 XXXXX
sendmail[293]: My unqualified
host name (XXXXX) unknown;
sleeping for retry The system
is ready.
The system reboots and displays the console
login prompt for Solaris 8.