Installation
36 Avaya IR R1.2 Installation
Step System
prompt
Action
8
The Solaris Installation Program
The Solaris installation program
is divided into a series of short
sections where you'll be prompted
to provide information for the
installation. At the end of each
section, you'll be able to change
the selections you've made before
continuing.
About navigation...
- The mouse cannot be used
- If your keyboard does not have
function keys, or they do not
respond, press ESC; the legend at
the bottom of the screen will
change to show the ESC keys to
use for navigation.
Press F2 to acknowledge the screen.
9
Identify This System
On the next screens, you must
identify this system as networked
or non-networked, and set the
default time zone and date/time.
If this system is networked, the
software will try to find the
information it needs to identify
your system; you will be prompted
to supply any information it
cannot find.
To begin identifying this system,
press F2.
Press F2 to acknowledge the screens.
10
Host name:
Enter the host name for the Avaya IR
system and press F2.
11
Networked
[ ] Yes
[ ] No
If you plan to connect your system to a
network, position the cursor between the
Yes
brackets using the arrow keys. Press
Enter. An X appears in the brackets to
indicate your selection. Press F2.
12
Use DHCP
[ ] Yes
[ ] No
Select whether DHCP is to be used on your
LAN. Press
F2.
If you choose
No
(the preferred option), the
system uses static IP address for proxy
connections.
13
IP address:
Enter the IP address of the Avaya IR
system and press F2.