Avaya IP Agent Installation And User Manual Download

Page: 77 / 286

CallMaster VI configurations

Issue 1.1 August 2004

Before you begin

Before configuring station settings on the Avaya communication server, you should have
completed the procedure in

Ensuring compatibility

on page 75 to verify that your Avaya

communication server supports Avaya IP Agent and Feature Access Codes.

To use Avaya CallMaster VI telephones, you must have the PASTE feature enabled on
your Avaya communication server.

To change settings on the Avaya communication server, you must have a user ID with the
proper administrative permissions.

If the station has not yet been created, you must create it using the

add station

command on the Avaya communication server.

Steps for configuring CallMaster VI station settings

To change station settings to support Avaya CallMaster VI configurations:

1. Log in to the Station Administration Terminal (SAT) on the Avaya communication

server.

2. Enter

change station

XXXXX

where

XXXXX

is the number of the station to be used

with Avaya IP Agent.

The Avaya communication server displays the

change station

form for the specified

extension.

3. In the

Type:

field, enter

606A1

4. In the

Port:

field, enter the number of the port providing the connection for the Avaya

CallMaster VI telephone.

5. Navigate to Page 3 of the

change station

form.

6. On pages

, and

of the station administration forms, assign functions to each

button that you want to appear in your Avaya IP Agent

Phone Features

window.

You must assign the necessary agent work mode buttons that are used in your contact
center:

●

auto-in

- This function makes agents available for new calls immediately after the

current call is finished.

●

manual-in

- This function makes the agent available to take a call and then places

the agent in the After Call Work (ACW) mode when the call has been completed.

●

after-call

- This function places agents in the After Call Work (ACW) mode.

●

aux-work

- This function places agents in the Auxiliary Work (AUX) mode. Multiple

Auxiliary Work buttons with different reason codes can be assigned to this
extension.

Summary of Contents for IP Agent































































































































































































































































































Search results

Summary of Contents for IP Agent

Reviews:

Related manuals for IP Agent

Brands by name

Popular brands

Avaya IP Agent, Installation And User Manual

Search results

Summary of Contents for IP Agent

Reviews:

Related manuals for IP Agent

Brands by name

Popular brands