Avaya IP Agent Installation And User Manual Download

Page: 81 / 286

IP Telephone and Avaya Telephone-IP configurations

Issue 1.1 August 2004

6. Navigate to Page 9 of the

customer-options

form.

7. For the Avaya Telephone-IP configuration, ensure that the

Limit

field for the

IP_AGENTSC Rel. 5

Product ID is set to the number of licenses you purchased for

Avaya IP Agent R5. For the IP Telephone configuration, verify the number of licenses
for the

IP_AGENT Rel. 5

Product ID.

Note:

Note:

This configuration can use either the

IP_AGENTSC

IP_Agent

licenses.

Configuring station settings

This section provides the procedure for configuring station settings to support the IP
Telephone and Avaya Telephone-IP configurations.

Before you begin

Before configuring station settings on the Avaya communication server, you should have
completed the procedure in

Ensuring compatibility

on page 79 to verify that your Avaya

communication server supports Avaya IP Agent and Feature Access Codes.

To change settings on the Avaya communication server, you must have a user ID with the
proper administrative permissions.

If the station has not yet been created, you must create it using the

add station

command on the Avaya communication server.

Important:

Important:

To use an Avaya IP telephone with Avaya IP Agent, the firmware version of
the telephone must be 1.7 or later.

Summary of Contents for IP Agent































































































































































































































































































Search results

Summary of Contents for IP Agent

Reviews:

Related manuals for IP Agent

Brands by name

Popular brands

Avaya IP Agent, Installation And User Manual

Search results

Summary of Contents for IP Agent

Reviews:

Related manuals for IP Agent

Brands by name

Popular brands