Page 10 - Headset Working
Basic Call Handling Features
Page 10 - Basic Call Handling Features
IP Office 5410 User’s Guide
Headset Working
40DHB0002UKEY – Issue 1 (7th February 2005)
Headset Working
When a headset is to be used on your 5410, it must be plugged in to the headset
socket on the side of your 5410 telephone. To activate the headset and switch off the
handset, press
Headset
. The lamp beside the button is illuminated when
headset working is activated.
To answer an incoming call:
1. Press the call appearance key next to the flashing bell icon (
)
:
To clear a headset call:
1. Press
Drop
.
To manually make a call:
1. Dial the number (remember to include the required access code (for example,
9
)
for an outside line) and listen to the progress of the call.
To automatically make a call:
Do any of the following:
1. Press
Redial
and select from (up to) one of the last ten numbers that you
dialed by pressing the associated a call appearance key
.
The call is made automatically for you.
or
Access the Call Log and initiate a call to a specific entry.
See Using the Call Log on page 17.
or
Access the Speed Dial List in your personal directory and initiate a call to a specific
entry. See Speed Dials on page 13.
2. When the call is answered, speak to the called party.
Speakerphone
The two-way built-in speakerphone allows you to make and answer calls without lifting
your handset. Keep in mind that two-way speakerphones may not operate satisfactorily
in every environment (such as in very noisy locations) and that they operate best when
you speak directly too them.
To make or answer a call without lifting the handset, or to use the speakerphone
with any feature:
1. Press
Speaker
. The LED beside the button illuminates.
2. Make or answer the call, or access the selected feature.
3. Adjust speakerphone volume if necessary.
•
To change the volume use the
and
buttons. The display shows
the volume level. (There are eight volume levels.)
To change from the speakerphone to handset (or headset if fitted)
1. Pick up the handset (or press
Headset)
and talk.
To change from the handset to the speakerphone
1. Press
Speaker
. The LED beside the button illuminates.
2. Hang up the handset.
To end a speakerphone call
1. Press
Speaker
again. The LED beside the button goes out.
