Identify the status display in the D160 Handset Writer.
4. In the D160 Handset Writer, click the
Port Scan
button to populate the list of newly
available ports.
The Writer application highlights and selects the port number allocated in the
Upgrade Jig.
5. Connect the Upgrade Jig to the handset using the headset jack and remove the
battery from the handset.
6. Click the
Start
button on the Writer application, then reinstall the battery.
The writing begins. The writing process should take less than a minute to
complete.
If the handset was not detected by the application, the status display reads
Handset
not detected
.
7. If successful, the status display reads
Update complete
.
If unsuccessful, the status display reads
Update failed
. If the update fails:
• Check the connection between the Upgrade Jig and the handset.
• Ensure that the handset has a fully-charged and compatible battery.
Overview
D100 SIP Wireless Terminal Installation and Administration Guide
December 2012 77