on page 66
on page 66
on page 67
on page 68
on page 68
on page 69
MAC address
View the MAC address using the following procedure.
Procedure
1. Access the
Network
submenu, navigate to
MAC Address
, and press the
Select
soft key.
The handset display shows the MAC address.
For example:
MAC: 00.1A.2B.3C.4D.5E
2. Press the
Back
soft key to return to the menu list.
IP address
View and edit the IP address using the following procedure.
Procedure
1. Access the
Network
submenu, navigate to
IP Address
, and press the
Select
soft
key.
The handset display shows the IP address.
For example:
IP Addr: 192.168.100.200
2. Administrators have the option to edit the address using the
Edit
soft key.
Otherwise, you can only view and exit the IP address menu in read-only mode and
you will not be able to perform the following steps.
3. Press
Edit
and enter the IP address manually using the keypad. The
<<
and
>>
soft
keys move the cursor in that direction. Press
More..
to access the
Dot
soft key which
you can use to place a dot, or decimal, in the IP address.
4. When you are satisfied with the address, press the
OK
soft key.
If you enter an invalid IP address in step 3, the handset emits an error tone.
5. If the IP address is valid, the handset requests confirmation to complete the change.
Press
Yes
to complete the change or
No
to cancel the change.
Overview
D100 SIP Wireless Terminal Installation and Administration Guide
December 2012 65
