H.323 Telephone Installation
Page 51
15-601046 Issue 17e (Wednesday, November 14, 2012)
IP Office
Installation: Static Address Installation
2.8 Phone Registration
For new phones and phones that have been
reset
, the phone will request an extension number. If
auto-create
is
enabled the extension number used, if free, will create new extension and user entries in the IP Office configuration. If
auto-create is not enabled, the extension number used must match a VoIP extension entry within the IP Office
configuration, see
Manually Creating Extensions
.
1. Following file loading the phone will request extension information:
·
Ext. =
Enter the extension number the phone should use and press #. Wrong Set Type is displayed if you try to
use the extension number of an existing non-IP extension.
·
Password =
The password used is as follows:
·
If using auto-create for a new user and extension, just enter any number and press #. Any digits entered
are not validated or stored.
·
If not using auto-create, enter the user's Login Code as set in the IP Office configuration.
2. Test that you can make and receive calls at the extension.
71
45
45
