IP Office Basic Edition - Quick Mode Installation
Page 172
15-601042 Issue 24i (20 December 2011)
IP Office 8.0
9.4.1 Analog Trunk 16
The IP500 Analog Trunk module can be used to add 16 additional analog trunks to an IP Office system. The module
supports both loop-start and, with suitable grounding, ground-start trunks.
·
In IP Office Basic Edition - Quick Mode modes, only 1 Analog Trunk module is supported.
·
IMPORTANT
In all IP Office installations, any module being used for analog trunk connections must be connected to a
functional
earth
.
·
WARNING
Within areas of high lightning risk, any module using analog trunk connections must be connected to a
protective
ground
and to
surge protection equipment
(an Avaya 146G Surge Protector).
Feature
Details
Supported on
IP500 and IP500 V2.
Locales
This module is currently only supported in North American locales.
Software Level
IP Office core software level 1.0 minimum. Bin file = naatm16.bin.
Included
Power supply unit (see below) and Expansion Interconnect cable.
Power Supply
The module is supplied with a 2-pin, 40W external power supply unit. The PSU has an integral
power cord for connection to the module's DC I/P socket. A locale specific
IEC60320 C7 power cord
for the external PSU is required but is not supplied with the module.
Mounting
The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IP500 Rack
Mounting Kit. It can be wall mounted using the IP500 Wall Mounting Kit V2.
Dimensions
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.
Weight
Unboxed: 2.9Kg/6.6lbs. Boxed: 4.2Kg/9.4lbs.
27
27
28
22
