Deploying Avaya IP Office™ Platform IP500 V2
Page 28
15-601042 Issue 30j (18 May 2015)
IP Office™ Platform 9.1
Comments on this document? infodev@avaya.com
1.8.2 IP400 External Expansion Modules
The following IP400 external expansion modules are supported by IP Office Release 9.1 and can be used with IP500 V2
control units. Each module uses an external
power supply unit
supplied with the module. A locale specific
power cord
for the PSU must be ordered separately.
If being rack mounted these units use the IP400 rack mounting kit. If being rack mounted, these units use the IPO IP500
RACK MNTG KIT. They cannot be wall mounted.
·
IP400 Analog Trunk Module (ATM16)
Provides an additional 16
ANALOG
ports for connection of analog trunks.
Supports both loop-start and ground-start trunks.
·
Available in a number of variants for different locales.
·
Use with ground start trunks requires that the trunk module and the IP
Office control unit are grounded.
·
IP400 Digital Station Module V2
Provides, depending on variant, an additional 16 or 30
DS
ports for
supported
Avaya digital phones
. Supersedes the previous Digital Station
module.
·
IP400 Phone Module V2
Provides, depending on variant, an additional 8, 16 or 30
PHONE
ports
for analog phones. Supersedes the previous Phone module. With IP Office
3.1, the Phone V2 supports a wider range of message waiting indication
(MWI) options than Phone V1 modules.
30
31
230
349
232
353
39
234
358
