manualshive.com logo in svg

Avaya IP500, Installation Manual

The THORLABS IP500 User Manual is available for free download on our website. This comprehensive manual provides step-by-step instructions, troubleshooting tips, and key specifications, ensuring seamless operation of the THORLABS IP500. Get your free copy at 88.208.23.73:8080 and maximize the potential of this exceptional product.

Share
Download
background image

Installing IP500/IP500 V2

Page 3

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

Named User License (NU). You may: (i) install and use the Software on a single Designated Processor or Server per authorized Named User
(defined below); or (ii) install and use the Software on a Server so long as only authorized Named Users access and use the Software. “Named
User”, means a user or device that has been expressly authorized by Avaya to access and use the Software. At Avaya’s sole discretion, a
“Named User” may be, without limitation, designated by name, corporate function (e.g., webmaster or helpdesk), an e-mail or voice mail
account in the name of a person or corporate function, or a directory entry in the administrative database utilized by the Software that permits
one user to interface with the Software.

Shrinkwrap License (SR). You may install and use the Software in accordance with the terms and conditions of the applicable license
agreements, such as “shrinkwrap” or “clickthrough” license accompanying or applicable to the Software (“Shrinkwrap License”).

Heritage Nortel Software
“Heritage Nortel Software” means the software that was acquired by Avaya as part of its purchase of the Nortel Enterprise Solutions Business in
December 2009. The Heritage Nortel Software currently available for license from Avaya is the software contained within the list of Heritage
Nortel Products located at http://support.avaya.com/LicenseInfo under the link “Heritage Nortel Products”. For Heritage Nortel Software, Avaya
grants Customer a license to use Heritage Nortel Software provided hereunder solely to the extent of the authorized activation or authorized
usage level, solely for the purpose specified in the Documentation, and solely as embedded in, for execution on, or (in the event the applicable
Documentation permits installation on non-Avaya equipment) for communication with Avaya equipment. Charges for Heritage Nortel Software
may be based on extent of activation or use authorized as specified in an order or invoice.

Copyright
Except where expressly stated otherwise, no use should be made of materials on this site, the Documentation, Software, or hardware provided
by Avaya. All content on this site, the documentation and the Product provided by Avaya including the selection, arrangement and design of the
content is owned either by Avaya or its licensors and is protected by copyright and other intellectual property laws including the sui generis
rights relating to the protection of databases. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute in any way
any content, in whole or in part, including any code and software unless expressly authorized by Avaya. Unauthorized reproduction,
transmission, dissemination, storage, and or use without the express written consent of Avaya can be a criminal, as well as a civil offense under
the applicable law.

Virtualization
Each vAppliance will have its own ordering code. Note that each instance of a vAppliance must be separately ordered. If the end user customer
or Avaya channel partner would like to install two of the same type of vAppliances, then two vAppliances of that type must be ordered.
Each Product has its own ordering code. Note that each instance of a Product must be separately licensed and ordered. “Instance” means one
unique copy of the Software. For example, if the end user customer or Avaya channel partner would like to install two instances of the same
type of Products, then two Products of that type must be ordered.

Third Party Components
“Third Party Components” mean certain software programs or portions thereof included in the Software that may contain software (including
open source software) distributed under third party agreements (“Third Party Components”), which contain terms regarding the rights to use
certain portions of the Software (“Third Party Terms”). Information regarding distributed Linux OS source code (for those Products that have
distributed Linux OS source code) and identifying the copyright holders of the Third Party Components and the Third Party Terms that apply is
available in the Documentation or on Avaya’s website at: http://support.avaya.com/Copyright. You agree to the Third Party Terms for any such
Third Party Components.

Note to Service Provider
The Product may use Third Party Components that have Third Party Terms that do not allow hosting and may need to be independently
licensed for such purpose.

Preventing Toll Fraud
“Toll Fraud” is the unauthorized use of your telecommunications system by an unauthorized party (for example, a person who is not a corporate
employee, agent, subcontractor, or is not working on your company's behalf). Be aware that there can be a risk of Toll Fraud associated with
your system and that, if Toll Fraud occurs, it can result in substantial additional charges for your telecommunications services.

Avaya Toll Fraud intervention
If you suspect that you are being victimized by Toll Fraud and you need technical assistance or support, call Technical Service Center Toll
Fraud Intervention Hotline at +1-800-643-2353 for the United States and Canada. For additional support telephone numbers, see the Avaya
Support website: http://support.avaya.com. Suspected security vulnerabilities with Avaya products should be reported to Avaya by sending mail
to: securityalerts@avaya.com.

Trademarks
The trademarks, logos and service marks (“Marks”) displayed in this site, the Documentation and Product(s) provided by Avaya are the
registered or unregistered Marks of Avaya, its affiliates, or other third parties. Users are not permitted to use such Marks without prior written
consent from Avaya or such third party which may own the Mark. Nothing contained in this site, the Documentation and Product(s) should be
construed as granting, by implication, estoppel, or otherwise, any license or right in and to the Marks without the express written permission of
Avaya or the applicable third party.
Avaya is a registered trademark of Avaya Inc.
All non-Avaya trademarks are the property of their respective owners. Linux® is the registered trademark of Linus Torvalds in the U.S. and
other countries.

Summary of Contents for IP500



























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IP500

Samsung SPH-a660 Series Reference Manual preview
SPH-a660 Series
Brand: Samsung Pages: 2
Samsung SGH-S100 User Manual preview
SGH-S100
Brand: Samsung Pages: 73
Samsung SGH-E715 User Manual preview
SGH-E715
Brand: Samsung Pages: 164
Samsung SCH-a600 Series Quick Reference Card preview
SCH-a600 Series
Brand: Samsung Pages: 2
Aastra 6725ip Quick Start Manual preview
6725ip
Brand: Aastra Pages: 9
TCL 10SE Manual preview
10SE
Brand: TCL Pages: 52
Alcatel T-Mobile 4044W Manual preview
T-Mobile 4044W
Brand: Alcatel Pages: 24
Docomo FOMA SH906i Instruction Manual preview
FOMA SH906i
Brand: Docomo Pages: 596
Alpha Communications AlphaRefuge 2100 Series Installation, Use And Wiring Instructions preview
AlphaRefuge 2100 Series
Brand: Alpha Communications Pages: 18
Blackberry 8800 - SMARTPHONE - SAFETY AND Getting Started preview
8800 - SMARTPHONE - SAFETY AND
Brand: Blackberry Pages: 8
Allview H3 Join User Manual preview
H3 Join
Brand: Allview Pages: 82
BT ON-AIR 2000 EXECUTIVE User Manual preview
ON-AIR 2000 EXECUTIVE
Brand: BT Pages: 25
Samsung SGH-X426 Manual Del Usuario preview
SGH-X426
Brand: Samsung Pages: 83
Zte F285 User Manual preview
F285
Brand: Zte Pages: 79
Zte Z730 Quick Start Manual preview
Z730
Brand: Zte Pages: 116
mobilicity Totem User Manual preview
Totem
Brand: mobilicity Pages: 99
Myria L550 User Manual preview
L550
Brand: Myria Pages: 74
Acer CP22 User Manual preview
CP22
Brand: Acer Pages: 6

Brands by name

Popular brands

Load more brands