manualshive.com logo in svg

Avaya IP500, Installation Manual

The THORLABS IP500 User Manual is available for free download on our website. This comprehensive manual provides step-by-step instructions, troubleshooting tips, and key specifications, ensuring seamless operation of the THORLABS IP500. Get your free copy at 88.208.23.73:8080 and maximize the potential of this exceptional product.

Share
Download
background image

Installing IP500/IP500 V2

Page 403

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

System Components: Licences

10.16.1 System Edition Licenses

These license are used to set what range of features the IP Office system supports. 

·

Essential Edition : IPO R9 ESSNTL ED ADI LIC - 275631 
For Release 8.0 and higher, this license is required for IP500 V2 systems to run in IP Office Essential Edition. It is
therefore a pre-requisite to the Preferred Edition and Advanced Edition licenses on those systems. This license
is not required for systems running IP Office Basic Edition - PARTNER® Mode, IP Office Basic Edition - Norstar Mode
or IP Office Basic Edition. 

·

For systems upgraded to 8.0 or higher, a Virtual Essential Edition license is automatically added to the
system configuration as part of the upgrade. See 

Upgrade Licenses

. 

·

Essential Edition Additional Voicemail Ports : IPO R9 ESSNTL ED ADD 2CH ADI LIC - 275632. 
For IP500 V2 only. Unlicensed, the Embedded Voicemail provided by the system supports 2 simultaneous
connections and 15 hours of storage. This can be expanded up to 6 channels by the addition of licenses, each
of which enables an additional two channels. For IP Office Release 7.0+ each license also enables an additional
5 hours of storage.

·

Preferred Edition (Voicemail Pro) : IPO R9 PREFRD VM PRO ADI LIC - 275653. 
This license enables support for Voicemail Pro as the IP Office's voicemail server with 4 voicemail ports.  The 
Preferred Edition license allows the voicemail server to provide the services listed below. For IP Office Release 8.0
and higher, an Essential Edition license is a pre-requisite for this license on IP500 V2 systems.

·

Mailboxes for all users and hunt groups. 

·

Announcements for users and hunt groups. 

·

Customizable call flows. 

·

Call recording to mailboxes. 

·

Campaigns. 

·

TTS email reading for users licensed to Mobile
Worker or Power User profiles.

·

Use of Conference Meet Me functions. 

1. For IP Office Release 8.0 and higher, a Preferred Edition 

system license

 is a pre-requisite for any

user profile licenses. 

·

For system's upgrade to IP Office Release 8.0 or higher, user profiles licenses are valid without the
need for a Preferred Edition license. See 

Upgrade Licenses

. 

·

In a Small Community Network, the Preferred Edition license of the central system is automatically
shared with other systems in the network, enabling user profile licenses on those other systems.
However, each system supporting a Voicemail Pro server still requires its own Preferred Edition
license for Voicemail Pro operation.

2. For a IP500 V2 system fitted with an Unified Communications Module, the presence of the card acts as an

automatic Preferred Edition license.

·

Advanced Edition: IPO R9 ADV ED ADI LIC - 275617.
This license enables the additional features listed below. A Preferred Edition license is a pre-requisite for this
license. For IP Office Release 8.0 and higher, an Essential Edition license is also a pre-requisite for this license on
IP500 V2 systems.

·

Support for Customer Call Reporter including 1
supervisor. 

·

Voicemail Pro database interaction (IVR).

[1]

·

Voicemail Pro Visual Basic Scripting.

[1]

 

·

Voicemail Pro call recording to ContactStore.

[3]

·

Voicemail Pro call flow generic TTS (8 ports).

[1][2]

1. Only supported on Windows based Voicemail Pro servers. 

2. Provides up to 8 ports of generic TTS for use with Speak Text actions within Voicemail Pro call flows. Not

used for user TTS email reading. Not supported for Linux based voicemail servers. 

3. Note: In a Small Community Network using centralized voicemail, this license only enables ContactStore

support for the central IP Office. Remote IP Offices in the network require their own Advanced Edition
license or a VMPro Recordings Administrator license. 

404

403

404

Summary of Contents for IP500



























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IP500

NEC SV8500 Reference Sheet preview
SV8500
Brand: NEC Pages: 2
2N LiftIP Manual preview
LiftIP
Brand: 2N Pages: 8
2N Lift1 Compact User Manual preview
Lift1 Compact
Brand: 2N Pages: 83
Samsung SPH-D720 Nexus S 4G Owner'S Manual preview
SPH-D720 Nexus S 4G
Brand: Samsung Pages: 14
Samsung SMN900W8 Quick Start Manual preview
SMN900W8
Brand: Samsung Pages: 42
Samsung SGH-D410C Quick Reference Card preview
SGH-D410C
Brand: Samsung Pages: 2
Samsung SPH-M320 Manual Del Usuario preview
SPH-M320
Brand: Samsung Pages: 172
Samsung SCH-N356 Quick Reference Card preview
SCH-N356
Brand: Samsung Pages: 2
Samsung SPH-A420 Manual De Usuario preview
SPH-A420
Brand: Samsung Pages: 158
Samsung SCH-A605 Manual Do Usuário preview
SCH-A605
Brand: Samsung Pages: 79
Samsung SGH E250 - Cell Phone 13 MB Manual Del Usuario preview
SGH E250 - Cell Phone 13 MB
Brand: Samsung Pages: 160
Samsung X650 - SGH Cell Phone 3 MB Manual Del Usuario preview
X650 - SGH Cell Phone 3 MB
Brand: Samsung Pages: 90
Samsung Tint SCH-R420 Series Manual Del Usuario preview
Tint SCH-R420 Series
Brand: Samsung Pages: 174
Samsung SCH U340 - Cell Phone - Verizon Wireless User Manual preview
SCH U340 - Cell Phone - Verizon Wireless
Brand: Samsung Pages: 158
Samsung SCH-I589 Quick Start Manual preview
SCH-I589
Brand: Samsung Pages: 29
Samsung SUNBURST SGH-A697 Series User Manual preview
SUNBURST SGH-A697 Series
Brand: Samsung Pages: 185
Samsung Transform SPH-M920 Manual Del Usuario preview
Transform SPH-M920
Brand: Samsung Pages: 238
Samsung Strive SGH-A687 Series Manual Del Usuario preview
Strive SGH-A687 Series
Brand: Samsung Pages: 153

Brands by name

Popular brands

Load more brands