manualshive.com logo in svg

Avaya IP500, Installation Manual

The THORLABS IP500 User Manual is available for free download on our website. This comprehensive manual provides step-by-step instructions, troubleshooting tips, and key specifications, ensuring seamless operation of the THORLABS IP500. Get your free copy at 88.208.23.73:8080 and maximize the potential of this exceptional product.

Share
Download
background image

Installing IP500/IP500 V2

Page 406

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

10.16.4 Telephone/Endpoint Licenses

The use of H323 and SIP phones with IP Office Release 6.0+ is controlled by the following licenses. Different licenses are
used for Avaya IP phones, non-Avaya phones (including non-Avaya softphones) and Avaya softphones.

·

Avaya IP Endpoints License 
On IP500 and IP500 V2 systems, these licenses are used to license additional Avaya IP phones. This includes all
1600, 4600, 5600, 9600, IP DECT, DECT R4, T3 IP, Spectralink and VPN phones supported by IP Office Release
6.0. 

·

IPO R9 AV IP ENDPOINT 1 ADI LIC - 275618.

·

IPO R9 AV IP ENDPOINT 5 ADI LIC - 275619.

·

IPO R9 AV IP ENDPOINT 20 ADI LIC - 275620.

·

The system automatically licenses 12 Avaya IP phones for each IP500 VCM 32 and or IP500 VCM 64 card
installed in the system without requiring additional licenses to be added to the configuration. This does not
apply for IP500 VCM 32 V2 and IP500 VCM 64 V2 cards or IP500 Combination cards.

·

Additional Avaya IP phones are licensed either by the addition of Avaya IP Endpoints licenses above or the
conversion of legacy IP500 VCM Channels licenses to Channel Migration licenses (see below). 

·

By default licenses are consumed by each Avaya IP phone that registers with the IP Office in the order that
they register. The license is released if the phone unregisters. However, it is possible to reserve a license for
particular phones in order to ensure that those phones always obtain a license first if available. This is done
through the Reserve Avaya IP Endpoint Licence setting of each IP extension. 

·

 Warning 

Avaya IP phones without a license will still be able to register but will be limited to making emergency calls
only (Dial Emergency short code calls). The associated user will be treated as if logged off and the phone may
display "No license available" and "Emergency Calls Only". If a license becomes available, it will be assigned to
any unlicensed DECT handsets first and then to any other unlicensed Avaya IP phone in the order that the
phones registered. 

·

For existing IP500 systems upgraded to Release 6.0 or higher, existing VCM channels and IP500 VCM Channels
license are treated as follows: 

·

For each IP400 VCM card installed in the system, each VCM channel supported by the card allows support
for 3 Avaya IP phones. 

·

For each IP500 VCM 32 and IP500 VCM 64 card installed in the system, the 4 unlicensed VCM channels
previously provided by each card are converted to allow unlicensed support of 12 Avaya IP phones. This
does not apply for IP500 VCM 32 V2 and IP500 VCM 64 V2 cards and IP500 Combination cards.

·

For each legacy IP500 VCM Channels license, the license are converted Channel Migration licenses
supporting 3 Avaya IP phones. See the Channel Migration license below. 

·

The number of channels provided by an IP500 VCM 32 or IP500 VCM 64 card, up to a maximum of 32 or 64
respectively, depends on the actual codecs being used. Refer to 

IP500 VCM

.

·

3rd Party IP Endpoints License 
These licenses are used for support of non-Avaya IP phones including SIP extensions. The available license are used
in order of phone registration. If no licenses are available the phone will not be able to register. Available licenses
can reserved for a particular phone using the Reserve 3rd Party IP Endpoint License setting in the each IP
extension. This license was previously called the IP End-points license. 

·

IPO R9 3RD PARTY IP ENDPT 1 LIC - 275611.

·

IPO R9 3RD PARTY IP ENDPT 5 LIC - 275612.

·

IPO R9 3RD PARTY IP ENDPT 10 LIC - 275613.

·

IPO R9 3RD PARTY IP ENDPT 20 LIC - 275614.

·

IPO R9 3RD PARTY IP ENDPT 50 LIC - 275615.

Legacy Endpoint Licenses

·

Channel Migration 
These licenses were previously called IP500 VCM Channels. In pre-IP Office Release 6.0 systems, these license
were used to enable additional VCM channels on IP500 VCM 32 and IP500 VCM 64 cards. For IP Office Release 6.0
these license are no longer required. Any present in the configuration of systems upgraded to IP Office Release 6.0
are renamed Channel Migration. Each Channel Migration license instance enables support for 3 Avaya IP phones. 

232

Summary of Contents for IP500



























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IP500

Samsung SM-G920I Quick Start Manual preview
SM-G920I
Brand: Samsung Pages: 2
Samsung SM-A310F Quick Start Manual preview
SM-A310F
Brand: Samsung Pages: 78
Samsung GT-S6810P Quick Start Manual preview
GT-S6810P
Brand: Samsung Pages: 34
Samsung GT-S6500T Manual preview
GT-S6500T
Brand: Samsung Pages: 38
Yealink T48G-SKYPE FOR BUSINESS EDITION Quick Start Manual preview
T48G-SKYPE FOR BUSINESS EDITION
Brand: Yealink Pages: 12
Yealink T48 Quick User Manual preview
T48
Brand: Yealink Pages: 4
Yealink T46U User Manual preview
T46U
Brand: Yealink Pages: 16
Yealink T43U User Manual preview
T43U
Brand: Yealink Pages: 12
Yealink T42S Startup Manual preview
T42S
Brand: Yealink Pages: 3
Yealink T4 series Re-Provisioning Manual preview
T4 series
Brand: Yealink Pages: 4
Yealink T22P User Manual preview
T22P
Brand: Yealink Pages: 8
Yealink T42S Quick Reference Manual preview
T42S
Brand: Yealink Pages: 3
Yealink T53W Quick Reference Manual preview
T53W
Brand: Yealink Pages: 4
Yealink T42G Manual preview
T42G
Brand: Yealink Pages: 7
Yealink T48 User Manual preview
T48
Brand: Yealink Pages: 2
Yealink T22P Quick Reference Manual preview
T22P
Brand: Yealink Pages: 4
Yealink T48S Skype For Business Edition Quick Reference User Manual preview
T48S Skype For Business Edition
Brand: Yealink Pages: 9
Yealink T48S Skype For Business Edition Quick Reference Manual preview
T48S Skype For Business Edition
Brand: Yealink Pages: 3

Brands by name

Popular brands

Load more brands