Avaya™ M4648ML-T-2G Installation Guide
3
Specifications
Safety Information
The multimode and single-mode GBIC transceivers are Class 1 Laser products.
They comply with EN 60825-1 and Food and Drug Administration (FDA) 21 CFR
1040.10 and 1040.11.
The GBIC transceivers must be operated under recommended operating conditions.
Laser Classification
L
Class 1 lasers are inherently safe under reasonably foreseeable conditions of
operation.
Caution:
The use of optical instruments with this product will increase eye hazard.
Usage Restriction
When a GBIC transceiver is inserted into the M4648ML-T-2G Module but is not in
use, then the Tx and Rx ports should be protected with an optical connector or a
dust plug.
Avaya Approved GBIC Transceivers
Caution:
All Avaya approved GBICs are 3.3 V. Do not insert a 5 V GBIC.
Avaya supplies the following two GBIC transceivers. You can order these directly
from your local Avaya representative using the PEC or COM Codes:
In addition, Avaya has tested and approved a number of GBIC transceivers from
other manufacturers for use with this Module.
An up-to-date list can be found in Avaya’s website at the following address:
avaya.com/support
Type
Description
PEC Code
COM Code
SX Transceiver
Multimode Fiber
1000BASE-SX (550 m)
4705-150
108873241
LX Transceiver
Single-mode Fiber
1000BASE-LX (10 km)
4705-151
108873258
CLASS 1
LASER PRODUCT
