System 75 XE to R8si (Blowback)
Task List: System 75 XE to R8si
SI Installation and Upgrades
277
June 2004
Test single-carrier cabinet systems
1
Check System Status for Each Cabinet
2
Check Circuit Pack Configuration
3
Test Time Division Multiplexing Bus in Processor Port Network
4
Test Tone-Clock Boards
5
Test Expansion Interface Circuit Packs
6
Test Time Division Multiplexing Bus for Each Expansion Port Network
7
Test Tone-Clock for Each Expansion Port Network
8
Test Tone-Clock Interchange for Each Expansion Port Network
9
Test Expansion Interface Exchange for Each Expansion Port Network
10
Check Circuit Pack Configuration
11
Save Translations, if Required
Test multi-carrier cabinet systems
1
Check System Status for Each Cabinet
2
Check Circuit Pack Configuration
3
Test TDM Bus in PPN
4
Test Tone-Clock Circuit Packs
5
Test SPE Duplication Memory Shadowing Link
6
Test Duplicated Switch Processing
7
Element Interchange
8
Test Expansion Interface Circuit Packs
9
Test TDM for each EPN
10
Test Tone-Clock for each EPN
11
Test Tone-Clock Interchange for each EPN
12
Test Expansion Interface Exchange for Each EPN
13
Check Circuit Pack Configuration Again
14
System Test Completion
15
LED Indicators
Test telephones and other equipment
1
Make Test Calls
2
Test 302C Attendant Console
3
Test External Ringing
4
Test Queue Warning Indicator
5
Test Integrated Announcement
6
Test Music-on-Hold
7
Test Emergency Transfer
