Bring the System Online
Task List: Administer the System
464
SI Installation and Upgrades
June 2004
Task List: Administer the System
1
Log in to the System
on page 464
2
Deliver or install the License File
on page 464
3
Administer no-license/emergency numbers
on page 467
4
Change Site Data (MCC1 only)
on page 467
5
Change Cabinet 1 (MCC1 only)
on page 467
6
Add Cabinet 2 through N (AvayaDEFINITY Server r)
on page 469
7
Set Country Options
on page 470
8
Change the Password
on page 472
9
Set Daylight Savings Rules
on page 473
10
Set Date and Time
on page 474
Log in to the System
Return to Task List
1
Log in as craft.
NOTE:
If you have a dadmin login and password, you can use them instead of craft and the craft
password. You may have to contact Avaya to get the dadmin password.
2
Verify the screen displays
password:
3
Type the default password and press Enter.
For security reasons, the password is not displayed as it is typed. The system verifies a valid login
and password name were entered.
4
If an invalid login or password name was entered, the screen displays
login incorrect:
In
this case, repeat the procedure using the correct login and matching password.
5
If the system recognizes the login and password name, the screen displays the software version.
Verify the screen display is similar to:
Terminal Type (513, 715, 4410, 4425, VT220): [715]
6
Type the number of the management terminal and press Enter.
7
Verify the screen displays
command:
Return to Task List
Deliver or install the License File
Return to Task List
CAUTION:
This procedure must be done immediately after you upgrade the software. If the license
file is not installed within 10 days, the switch enters a No-License mode and shuts down
all call processing.
