Install Additional Hardware
Task List: Add DCS
594
SI Installation and Upgrades
June 2004
Task List: Add DCS
•
Install Cables (Add DCS)
on page 594
•
Add Circuit Packs (Add DCS)
on page 595
•
Test the External Connection to the LAN (Add DCS)
on page 595
•
Deliver License File (Add DCS)
on page 596
•
Administer DCS (Add DCS)
on page 598
•
Save Translations (Add DCS)
on page 598
Return to Task List
Install Cables (Add DCS)
Return to Task List
Install cable from the cabinet to a hub or Internet Protocol (IP) Switch as required. See
Figure 231, Cable
Connection for C-LAN,
on page 594. For a pinout of TN799x, see
TN799x Pinout
on page 595.
From the rear of the cabinet:
1
Connect the 259A connector to the backplane connector corresponding to the TN799x slot.
2
Connect one end of the CAT5 cable to the 259A connector. Connect the other end to the
customer’s network.
Figure 231: Cable Connection for C-LAN
Figure notes
1
259A Connector
2
DW8A Cable
3
Hub or IP Switch
1
2
3
cydflan2 EWS 101398
