Install and Administer Trunks
Install CAMA/E911 Trunk
SI Installation and Upgrades
665
June 2004
Figure 269: Route Pattern form (Page 1, Pattern Number 12)
Return to Task List
Changing the CAMA Numbering and Class of
Restriction
Return to Task List
1
At the prompt, type
change cama-numbering
and press Enter.
The
Figure 270, CAMA Numbering Format form,
on page 666 appears.
2
Enter you own system default in the
System CESID Default:
field, and press Enter.
This is the number outpulsed when the extension code is not found in the CAMA Numbering
table.
3
In the
Ext Len
,
Ext Code
,
CESID
, and
Total Length
fields, fill out to your own CAMA
numbering plan and press Enter. Be sure to cover all extensions.
4
At the prompt, type
change cor
<number>
(the class of restriction (COR) to be changed) and
press Enter.
The
Figure 271, Class of Restriction form (page 1),
on page 666 appears.
5
Change all CORs that are defined for stations in order to remove any calling party restrictions for
911 calls.
6
Type none in the
Calling Party Restriction:
field, and press Enter.
7
Type
save translation
and press Enter.
Page 1 of X
Pattern Number: 12
Grp. FRL NPA Pfx Hop Toll No. Del Inserted IXC
No. Mrk Lmt List Digits Digits
1: 1__ 0 ___ _ __ __ 1_ ____________________________________ user
2: ___ _ ___ _ __ __ __ ____________________________________ user
3: ___ _ ___ _ __ __ __ ____________________________________ user
4: ___ _ ___ _ __ __ __ ____________________________________ user
5: ___ _ ___ _ __ __ __ ____________________________________ user
6: ___ _ ___ _ __ __ __ ____________________________________ user
BCC VALUE TSC CA-TSC ITC
BCIE Service/Feature Numbering LAR
0 1 2 3 4 W Request Format
1: y y y y y n y none_____ both ept outwats-bnd____ BAND: ___ ________ none
2: y y y y y n n rest _______________ ________ next
3: y y y y y n n rest _______________ ________ rehu
4: y y y y y n n rest _______________ ________ none
5: y y y y y n n rest _______________ ________ none
6: y y y y y n n rest _______________ ________ none
