Test Telephones and Other Equipment
Test 302C Attendant Console
732
SI Installation and Upgrades
June 2004
Make 2 calls from 1 telephone to another telephone. Make the first call by dialing a telephone and make
the second call by dialing a trunk access code and a Listed Directory Number (LDN).
Test 302C Attendant Console
Return to Task List
Check all lamps are operational and call another telephone in the system.
1
Simultaneously press and hold the Ringer Volume up button and the POS BUSY button.
This puts the console in the self-test mode.
NOTE:
Releasing the buttons returns the console to normal mode.
2
Verify all lamps on display light and remain lighted.
Each row of lamps on the console lights and goes dark in sequence from top to bottom.
3
Press Start and listen for dial tone.
4
The green lamp associated with Idle Call Appearance lights up.
The Position Available lamp goes dark.
5
Dial number associated with a working telephone.
Audible ringing tone is heard in ear piece.
6
Press Release.
Audible ringing tone is silenced. The green lamp associated with idle call appearance button goes
dark. The Position Available lamp lights.
Return to Task List
Test Selector Console
Return to Task List
Check that all selector console lamps are operational. Make call to a telephone in the system.
1
Simultaneously press and hold the Ringer Volume up button and the POS BUSY button on the
attendant console. This puts the console in the self-test mode.
2
Each row of lamps on the selector console lights and goes dark in sequence from top to bottom.
3
Press hundreds group select button. The hundreds group select lamp lights and any lamps
associated with busy telephone light.
4
Press Direct Extension Selection (DXS) button for the desired extension. Audible ringing tone is
heard in the earpiece on attendant console.
5
On attendant console, press Release. Audible ringing tone is silenced.
Return to Task List
