G3iV4 to Avaya Communication Manager
Task List: G3iV4 to Avaya Communication Manager
SI Installation and Upgrades
79
June 2004
Use this procedure for configurations containing the TN750 or TN750B announcement circuit pack.
Saving announcements takes about 40 minutes.
1
To determine whether the sytem has recorded announcements, type
display announcements
and
press Enter.
If no recorded announcements are listed, you do not have to save announcements.
NOTE:
If the customer can verify that no announcements have been changed since the
announcements were last saved, you do not have to save announcements. (But if there is
any doubt, save announcements!)
2
Type
save announcements
<
port network
> <
carrier
> <
slot
> and press Enter.
Return to Task List
Shut down DEFINITY LAN Gateway [from
G3V4]
Return to Task List
!
WARNING:
Neglecting to shut down the LAN Gateway assembly before powering down the system
cabinet can damage the LAN Gateway disk.
1
Log onto the DEFINITY LAN Gateway.
2
From the main menu, click Maintenance > Reset System > Shutdown.
Return to Task List
Shut down DEFINITY AUDIX system [from
G3V4]
Return to Task List
A yellow caution sticker on the system’s power unit notifies you to shut down the AUDIX before
powering down the system.
!
WARNING:
Neglecting to shut down an AUDIX assembly before powering down the system cabinet
where it resides can damage the AUDIX disk.
1
Log into the AUDIX as craft.
NOTE:
If you have a dadmin login and password, you can use them instead of craft and the craft
password.
