Adjuncts and Peripherals
Call detail recording (CDR)
806
SI Installation and Upgrades
June 2004
Administering CDR parameters
You must administer CDR parameters to let the system know that the adjunct is connected through
TCP/IP. For details on all fields on the CDR System Parameters screen, see Administrator’s Guide for
Avaya Communication Manager (555-233-506).
1
Type
change system-parameters cdr
and press Enter.
The CDR System Parameters screen appears.
2
In the
Primary Output Format
field, enter a format specific to the call accounting system,
if necessary. In the example,
unformatted
is used. If you were sending data directly to a printer,
you would use
printer
.
3
In the
Primary Output Endpoint
field, type CDR1.
4
If you use a secondary output device, and that device is also connected through TCP/IP, complete
the
Secondary Output Format
field. Also, type CDR2 in the
Secondary Output
Endpoint
field.
5
Press Enter to save your changes.
Testing the switch-to-adjunct link
You can use the test, status, busyout and release commands to find and correct problems with CDR links.
For more information about these commands, see the Maintenance manual for your switch.
Work with the vendor to test the link from the call accounting adjunct.
change system-parameters cdr
Page
1 of
1
CDR SYSTEM PARAMETERS
Node Number (Local PBX ID):
CDR Date Format: month/day
Primary Output Format: unformatted
Primary Output Endpoint: CDR1
Secondary Output Format: unformatted Secondary Output Endpoint: CDR2
Use ISDN Layouts? n
EIA Device Bit Rate: 9600
Use Enhanced Formats? n
Condition Code ‘T’ for Redirected Calls? n
Modified Circuit ID Display? n
Remove # From Called Number? n
Record Outgoing Calls Only? y
Intra-switch CDR? n
Suppress CDR for Ineffective Call Attempts? y CDR Call Splitting? y
Disconnect Information in Place of FRL? n Attendant Call Recording? y
Interworking Feat-flag? n
Force Entry of Acct Code for Calls Marked on Toll Analysis Form? n
Calls to Hunt Group - Record: member-ext
Record Called Vector Directory Number Instead of Group or Member? n
Record Called Agent Login ID Instead of Group or Member? n
Inc Trk Call Splitting? n
Record Non-Call-Assoc TSC? n
Record Call-Assoc TSC? n Digits to Record for Outgoing Calls: dialed
Privacy - Digits to Hide: 0 CDR Account Code Length: 4
status cdr-link
CDR LINK STATUS
Primary
Secondary
Link State: up
extension not administered
Maintenance Busy? no
