Setting Up the System
Configuring System Setup Parameters
Octel 50 Installation Guide
8-24
per-node basis on the AMIS Node Entry dialog box. AMIS parameters only apply to Octel
50 systems with sentinels that support the AMIS network protocol.
For the first five parameters, the minimum and maximum refer to the length of the entry
allowed, not an actual number.
AMIS Parameters - #38
System
Telephone
Access Number
This parameter defines the local Octel 50 system’s phone
number. The Octel 50 system includes the System
Telephone Access Number as part of network message
dispatches to remote systems. This allows remote sites to
reply directly to messages you send them.
When/How to Use
When defining the System Telephone Access Number, you
must include the area code and 7-digit phone number, such
as 9415551234. Only digits can be entered for this
parameter.
If you do not enter the System Telephone Access Number,
remote systems will be unable to reply directly to messages
dispatched from the Octel 50 system.
Related Parameters/Features
The Country Code is placed in front of the System
Telephone Access Number to identify the Octel 50 system
for remote sites.
If Set Too High
Not applicable.
If Set Too Low
Not applicable.
Min
0
Max
16
Default
Blank
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
AMIS Parameters - #39
AMIS Prefix
This parameter defines the code that the Octel 50 system
must insert before the dialing string when dispatching
network messages. This code can be used to identify a local
phone network or the Code for Accessing an Outside Line.
