Setting Up the System
Configuring System Setup Parameters
Octel 50 Installation Guide
8-26
Related Parameters/Features
You must correctly define the Country Code for the Octel 50
system to determine whether the International Access Code
is required for a network reply.
This parameter is only used for network replies. If Reply is
disabled on the Class of Service dialog box for all
subscribers, the International Access Code is not used.
If Set Too High
Not applicable.
If Set Too Low
Not applicable.
Min
0
Max
32
Default
Blank
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
AMIS Parameters - #41
Long Distance
Access Code
This parameter defines the code used to access long
distance dialing at the Octel 50 system location. The Octel
50 system uses this code when sending network replies to
remote systems in other area codes.
Dial Plan determines whether the Long Distance Access
Code is required for network replies. If the prefix of the
remote system is not found in Dial Plan, the Octel 50 system
assumes it is a long distance number and inserts the Long
Distance Access Code in the dialing string.
When/How to Use
Enter the Long Distance Access Code for the Octel 50
system location. The Long Distance Access Code for the
United States is 1.
The minimum and maximum for this parameter refer to the
length of the entry allowed, not an actual number.
Related Parameters/Features
This code is only used for network replies. If Network Reply
is disabled on the Class of Service dialog box for all
subscribers, the Long Distance Access Code is not used.
Use Dial Plan database must be enabled in the Dialing
parameters for the Octel 50 system to insert the Long
Distance Access Code when required for network replies.
If Set Too High
Not applicable.
If Set Too Low
Not applicable.
Min
0
Max
32
Default
Blank
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
