Avaya one-X 9611G Installing And Maintaining Download

Page: 38 / 90

9600 Series IP Deskphones installation

SIP Deskphones Release 6.4 Installation and Maintenance Guide

HTTPPROXY if HTTPPROXY is not null and if the configuration parameter
HTTPEXCEPTIONDOMAINS is null, or if HTTPEXCEPTIONDOMAINS is not null and the
rightmost part of the domain portion of MYCERTURL does not match one of the values of
HTTPEXCEPTIONDOMAINS. The values of the configuration parameters
MYCERTKEYLEN, MYCERTCN, MYCERTDN are used in the certificate request.

2. While the deskphone is attempting to contact the SCEP server to obtain a certificate, the

Title Line displays:

where

is the number of seconds since SCEP was initiated.

3. If the initial attempt to contact the SCEP server is not successful the deskphone continues

with start-up, and will not try to contact the SCEP server again unless it is reset or
power-cycled.

4. If a connection to the SCEP server is successfully established, if the value of the

configuration parameter MYCERTWAIT is 1, SCEP remains in progress until the request for
a certificate is granted or rejected.

5. If the request for a certificate is granted,

SCEP: Successful

displays on the Title line for at

least one second, and remains until it is replaced by a subsequent display.

6. The SCEP server connection terminates, and the deskphone continues with start-up. If the

request for a certificate is rejected

SCEP: Failed

displays on the Title line for at least one

second, and remains until it is replaced by a subsequent display. In this case, the SCEP
server connection terminates and the deskphone continues with startup.

7. if the value of the configuration parameter MYCERTWAIT is 0 (zero), SCEP remains in

progress until the request for a certificate is granted or rejected or until a response is
received indicating that the request is pending for manual approval. If the request for a
certificate is granted or rejected, the same text will be displayed as specified above.

8. If a response is received indicating that the request is pending for manual approval,

SCEP:

Pending

displays on the Title line for at least one second and remains until it is replaced by

a subsequent display. The connection to the SCEP server is terminated, and the deskphone
continues with startup. The deskphone periodically attempts to contact MYCERTURL as
specified above (but in the background without displaying any message) until the request is
granted or rejected.

9. If a device certificate and private key are successfully downloaded, they are saved in

non-volatile memory along with the MYCERTURL value used to obtain them.

10. When the point in time is reached at which the percentage of the interval of time specified in

the device certificate’s Validity object corresponding to the value of the configuration
parameter MYCERTRENEW has elapsed, the deskphone periodically attempts to contact
MYCERTURL as specified above (but in the background without displaying any message)
to renew the certificate, until the renewal request is granted or rejected.

SCEP: In progress...
s secs