Disable/Enable Debug Mode
Issue 2 December 2007
35
The
Clear
option erases all administered data — static programming, file server and call server
programming, and user settings, and restores all such data to default values. This option does
not affect the software load itself. If you have upgraded the telephone, the telephone retains the
latest software. Once you have cleared a telephone, you can administer it normally.
!
CAUTION:
CAUTION:
This procedure erases all administered data, without any possibility of recovering
the data.
Use the following procedure to clear the telephone of its administrative, user-assigned, and
options values.
1. When you select
CLEAR
from the Admin Procedures Screen, the telephone displays a
confirmation screen.
2. If you do not want to clear all values, press
No
to terminate the procedure and retain the
current values. Press
Yes
to clear all values to their initial default values.
The telephone displays the following text:
The telephone is cleared to its “out of the box” state, resetting the following values to their
factory defaults:
●
The 802.1X identity and password.
●
All system values and system initialization values.
●
User options, parameter settings, identifiers and password.
●
Any user data like Contact Lists or Call Logs are deleted.
After clearing the values, the telephone resets.
Disable/Enable Debug Mode
Use the following procedure to turn the debug mode for the button module serial port on or off.
9600 Series IP Telephones running SIP Release 2.0 software do not support a button module.
!
CAUTION:
CAUTION:
A DEBUG setting of “On” disables any adapter plugged into the MOD jack on the
underside of the telephone.
Clearing values.
