Restart Scenarios
64 9600 Series SIP IP Telephones Release 2.0 Installation and Maintenance Guide
Latest Boot File Loaded/No Application File or
Application File Needs to be Upgraded
This procedure occurs with normal application file upgrades.
1. The telephone displays:
2. The telephone detects and displays the speed of the Ethernet interface in Mbps, that is, 0,
10, or 100. The message
No Ethernet
displays until the software determines whether the
interface is 10 Mbps or 100 Mbps.
Note:
Note:
The Ethernet speed indicated is the LAN interface speed for both the telephone
and any attached PC.
3. The software determines whether sufficient IP Address information was downloaded. In this
scenario, it is discovered that sufficient information has
not
been downloaded. The
following message displays while the DHCP process is invoked:
The number of elapsed seconds is incremented once per second, until DHCP successfully
completes.
4. While the IP telephone establishes a TCP connection to the HTTP server, the telephone
displays the following message:
where
n
is the number of the IP Address obtained from the HTTP server and
ipadd
is the IP
Address.
5. The following message displays while the HTTP process is invoked:
The number increments once per second, until the HTTP server responds.
Restarting...
DHCP: 0 secs
* to program
HTTP:
n ipadd
HTTP:
n
uri
