4 Connecting to the PARTNER System
38
Creating a Remote Administration Password
Getting Started
Creating a Remote Administration Password
For security purposes, the Remote Administration Password is different from the
System Password. The Remote Administration Password can only be created on
the PARTNER system and must exist before you can connect to the PARTNER
system. There is no default password.
To create a Remote Administration Password:
1 From extension 10 or 11, press
f00
.
2 Press the left
i
twice.
3 Enter
#730
.
The following display appears:
Remote Password
Data
4 Enter a password up to eight alphanumeric characters in length. Each
character is established by entering two digits. (See the Character Code
Table in the PARTNER ACS Installation, Programming, Use for additional
details.)
5 To save the password, press
e
.
The display shows “Remote Password,” confirming that the password was
saved.
If you exit without pressing
e
, your new password will not
be saved.
6 Exit programming mode by pressing
f00
.
For more information about the location of special programming buttons on a
PARTNER phone, see the PARTNER system documentation.
PCAdminGS.book Page 38 Wednesday, May 19, 2004 1:28 PM
