12
SEC
T
I
O
N
You connect to the Remote Access card by going through an active automated attendant
(such as a voice mail system that automatically answers and routes the call). You can use
this method after business hours or anytime the Automated Attendant is active. To use the
Automated Attendant method, you must have previously established
a Hunt Group for the PARTNER Remote Access card.
On the
File
menu, select
Connect to PARTNER System.
Select
Automated Attendant
, and click
Next.
Enter the dial string and then click
OK
.
• phone number
• seven commas
•
7 7
and the single-digit Hunt Group number for the
Remote Access Card
When prompted, enter the Remote Administration Password and
then click
OK
.
When the connection is completed, a dialog box appears. Click
OK
.
AUTOMATED ATTENDANT
To create a Hunt Group while at a PARTNER phone:
1
From extension 10 or 11, activate System Programming by pressing
Feature
0 0
2
Press the left
Intercom
button twice
3
Enter
# 5 0 5
4
At the GROUP: prompt, enter a group number (1–6)
We recommend the number 6.
5
The following display appears
HUNT GROUP 6
EXTENSION:
6
Enter extension
7 6
(This is the pre-established extension number for your PARTNER modem.)
7
Exit programming mode by pressing
Feature 0 0
■
For more information about Hunt Groups, refer to the PARTNER system
documentation.
■
For information about the location of special programming buttons on a PARTNER
phone, see the PARTNER system documentation.
3
C o n n e c t i n g t o t h e PA R T N E R A C S S y s t e m
1
2
3
4
5
