Maintenance Commands
555-233-143
7-342
Issue 1 May 2002
Table 7-49.
Status AC - Failure Cause Values
Failure Cause
(hexadecimal)
Description
0x00 (0t0)
N/A
0x01 (0t1)
Incorrect destination address
0x02 (0t2)
Reason unknown
0x06 (0t6)
Reason unknown
0x10 (0t16)
Normal call clearing
0x11 (0t17)
Endpoint not available
0x12 (0t18)
ISDN timer expired
0x15 (0t21)
Reason unknown
0x12 (0t22)
Destination address changed
0x1C (0t28)
Bad destination or access denied
0x1D (0t29)
Access denied
0x1F (0t31)
Reason unknown
0x22 (0t34)
Trunks unavailable
0x26 (0t38)
Temporary or facility failure
0x29 (0t41)
Temporary or facility failure
0x2A (0t42)
Resources unavailable
0x2C (0t44)
Resources unavailable
0x32 (0t50)
Access denied
0x34 (0t52)
Access denied
0x36 (0t54)
Access denied
0x3A (0t58)
Resources unavailable
0x41 (0t65)
Required capability not implemented
0x42 (0t66)
Required capability not implemented
0x45 (0t69)
Required capability not implemented
0x51 (0t81)
ISDN protocol error
0x52 (0t82)
Required capability not implemented
0x58 (0t88)
Incorrect destination number
0x60 (0t96)
ISDN protocol error
0x61 (0t97)
ISDN protocol error
Continued on next page
Summary of Contents for S8700 Series
