INSTALLATION
Avaya
t
S9RM UPS Site Preparation, Installation and Operator’s Manual
S
05147387 Rev C
21
Rack-Mount Setup
The UPS can be installed in 19- or 23-inch racks and needs only 2U of
valuable rack space.
C A U T I O N
The UPS and EBM are heavy (see page 56). A minimum of two people are required to lift the
cabinets into the rack.
NOTE
Mounting rails are required for each UPS and EBM cabinet. If rails are not already
installed in your rack, contact your local distributor to order rail kits.
To install the UPS and optional EBMs in a rack:
1.
Place the UPS on a flat, stable surface with the front of the UPS
facing toward you.
2.
Attach the supplied mounting handles to the mounting brackets and
secure with the supplied screws (see Figure 5).
3.
Align the mounting brackets with the screw holes on the sides of
the UPS and secure with the supplied screws (see Figure 5).
4.
If installing optional EBMs, repeat Steps 1 through 3 for each
cabinet.
Mounting
Handle
Mounting
Bracket
Figure 5. Installing the Mounting Handles and Brackets