CONFIGURATION
Avaya
t
S9RM UPS Site Preparation, Installation and Operator’s Manual
S
05147387 Rev C
42
13.
Click
Apply
to save the change. The Update ERM Configuration
screen opens.
14.
Confirm the change by clicking
Yes
. The update completes, and the
ERM Options screen opens again.
15.
Click
Exit
.
Exiting Serial Pass-Through Mode
After using the card in Serial Pass-Through mode, restart the card in
Normal mode:
1.
Disconnect the configuration cable from the card and PC.
2.
Return the card’s switches to the original settings noted in Step 1
on page 40.
3.
Using a pen or paperclip, press the RESET switch on the
ConnectUPS-X Web/SNMP Card to restart the card in Normal
mode.