UPS MAINTENANCE
Avaya
t
S9RM UPS Site Preparation, Installation and Operator’s Manual
S
05147387 Rev C
52
4.
Pull the battery out onto a flat, stable surface (see Figure 29). See
“Recycling the Used Battery or UPS” on page 54 for proper
disposal.
Figure 29. Removing the Battery
5.
Slide the new battery into the UPS.
6.
Reconnect the battery cable and secure the battery cable in the
wire clips.
7.
Reinstall the battery retaining bracket and screws removed in
Step 2.
8.
Replace the UPS front cover.
How to Replace Extended Battery Modules
C A U T I O N
The Extended Battery Module (EBM) is heavy (see page 56). A minimum of two people are
required to lift the cabinets into the rack.
To replace the EBMs:
1.
Unplug the EBM cable from the UPS.
If additional EBMs are installed, unplug the EBM cable from the
battery connector on each EBM.
2.
If the EBM is in a tower configuration, remove the joining brackets.
3.
If the EBM is in a rack, install the supplied mounting handles and
brackets on the new EBM.