Avaya
t
S9RM UPS Site Preparation, Installation and Operator’s Manual
S
05147387 Rev C
59
Chapter 9
Troubleshooting
This section explains:
S
UPS alarms and conditions
S
How to silence an alarm
S
Service and support
Audible Alarms and UPS Conditions
The UPS has an audible alarm feature to alert you of potential power
problems. Use Table 11 to determine and resolve the UPS alarms and
conditions.
NOTE
Some alarms, such as the Overtemperature and Overload alarms, must be cleared by
shutting down and restarting the UPS (see page 62 for more information).
Flashing
Unlit
Lit
Indicator Legend
Self-Test
Test/Alarm
Reset Button
Battery Service
Site Wiring Fault
Overtemperature
Overload
Figure 31. Alarm Indicators
Silencing an Audible Alarm
Before silencing an alarm, check the alarm condition and perform the
applicable action to resolve the condition (see Table 11).
To silence the alarm for an existing fault, press the
button. If UPS
status changes, the alarm beeps, overriding the previous alarm silencing.