NN40170-101 Telephone Features User Guide
May 2010
7
To split a conference:
Press the line or intercom button of one caller to consult privately while the
other caller is on hold.
Note
: This feature is not available for multi-party conference calls.
To re-establish the conference:
Press
FEATURE
3
.
To disconnect one party:
1. Press the line or intercom button for the caller you want to disconnect.
2. Press
RLS
.
3. Press the line or intercom button to resume your conversation with the
other caller.
To independently hold two calls:
1. Press the line or intercom button of the first caller.
2. Press
HOLD
. The second caller is automatically put on hold.
Note
: This feature is not available for multi-party conference calls.
To re-establish the conference:
1. Retrieve one call from hold.
2. Press
FEATURE
3.
3. Retrieve the second call from hold.
To send Hookswitch or DTMF during a conference call:
Either system telephone engaged in a three-way conference call over a
Network CLID or DS trunk can issue a hookswitch or DTMF dialing request
without leaving the conference, if the feature is enabled.
Note:
This feature is not available for Avaya 20xx series IP Deskphones.
– To hear DTMF tones on these telephones during dial, activate Long
Tones (
FEATURE
808).
– To conference in another party through the trunk, use
Link
(
FEATURE
71)
Contrast
adjustment
FEATURE
*7 plus a number from 1 to 9 to adjust the display contrast.
Press
HOLD
to set your choice.
Telephone features
