Removing the logo plate
Remove the logo plate to access the power supply in a slot.
Procedure
1. Use a Phillips screwdriver to loosen the four captive screws, which secure the plate to the
chassis, until the plate disengages.
2. Pull the plate from the chassis.
Installing the AC power supply
Install the AC power supply to provide a power source to the system and components.
Before you begin
• Remove the logo plate, if required. Save the logo plate in case you need to operate the Virtual
Services Platform 9012 chassis with a power supply removed.
Voltage:
Risk of injury from electric shock
Before working on this equipment, be aware of proper safety practices and the hazards
involved with electrical circuits. Use only power cords that have a grounding path. Ensure
the switch is properly grounded before powering on the unit.
Removing the logo plate
December 2014
Installing AC Power Supplies in Avaya VSP 9000
21