CP2 [12/10/14 14:16:27.542] 0x000005b2 00000000 GlobalRouter SW INFO Found serial number
<00:24:7f:9c:00:00> in file
CP2 [12/10/14 14:16:27.542] 0x000005ba 00000000 GlobalRouter SW INFO License
Successfully Loaded From License Type -- PREMIER
CP2 [12/10/14 14:16:27.653] 0x00034594 00000000 GlobalRouter SW INFO System boot
CP2 [12/10/14 14:16:27.653] 0x00034595 00000000 GlobalRouter SW INFO VSP-9000 System
Software Release 3.4.5.0_B002
CP2 [12/10/14 14:16:27.697] 0x00010704 00000000 GlobalRouter HW INFO Waiting for CAN
initialization
CP2 [12/10/14 14:16:28.226] 0x00300604 00000000 GlobalRouter SLAMON INFO Starting Slamon
Monitor Agent Controller
CP2 [12/10/14 14:16:28.245] 0x0003459d 00000000 GlobalRouter SW INFO CPU card entering
warm-standby mode...
CP2 [12/10/14 14:16:28.248] 0x00088512 00000000 GlobalRouter SW INFO Loading
configuration from /intflash/SUSTDEV-VSP1.cfg
CP2 [12/10/14 14:16:28.426] 0x00300604 00000000 GlobalRouter SLAMON INFO SLA Monitor
Agent Controller started
CP2 [12/10/14 14:16:28.528] 0x00010757 00000000 GlobalRouter HW INFO Initial
configuration download to all cards completed
CP1 [12/10/14 14:16:29.157] 0x0000c5ec 00300001.128 DYNAMIC CLEAR GlobalRouter HW INFO
Link Up(2/1)
CP2 [12/10/14 14:16:28.697] 0x00010705 00000000 GlobalRouter HW INFO CAN initialized
CP2 [12/10/14 14:16:31.370] 0x00300604 00000000 GlobalRouter SLAMON INFO slamonLoop:
Entering main loop
CP1 [12/10/14 14:16:51.000] 0x000c85a2 03200001 DYNAMIC CLEAR GlobalRouter SW INFO NTP
synchronization succeeded
AVAYA COMMAND LINE INTERFACE
Login:
****** CP in slot 1 , CP in slot 2 and SF in SF1 are up and running ******
****** insert SF in SF 4 *****************************
CP1 [12/10/14 17:49:13.871] 0x0001081c 00400010.24 DYNAMIC SET GlobalRouter HW INFO Slot
SF 4 is initializing.
CP1 [12/10/14 17:49:13.898] 0x00010830 00000000 GlobalRouter HW INFO Detected 9090SF
module (Serial#: SSCHJW02YP) in slot SF 4
CP1 [12/10/14 17:49:13.898] 0x0001081d 00400010.24 DYNAMIC CLEAR GlobalRouter HW INFO
Slot SF 4 is finished initialization.
CP1 [12/10/14 17:49:20.504] 0x0001071e 00000000 GlobalRouter HW INFO Applied power to
module 9090SF in slot SF 4
CP1 [12/10/14 17:50:04.941] 0x00264503 00000000 GlobalRouter SW INFO Slot SF4: IMAGE
SYNC: Running pre-install script for image version ndtrc
CP1 [12/10/14 17:50:05.642] 0x00264503 00000000 GlobalRouter SW INFO Slot SF4: IMAGE
SYNC: Uboot image is consistent
CP1 [12/10/14 17:50:06.243] 0x00264503 00000000 GlobalRouter SW INFO Slot SF4: IMAGE
SYNC: Kernel image is consistent
CP1 [12/10/14 17:50:06.844] 0x00264503 00000000 GlobalRouter SW INFO Slot SF4: IMAGE
SYNC: Root FS image is consistent
CP1 [12/10/14 17:50:06.844] 0x00264503 00000000 GlobalRouter SW INFO Slot SF4: IMAGE
SYNC: App FS image is being updated...
CP1 [12/10/14 17:50:25.478] 0x00264503 00000000 GlobalRouter SW INFO Slot SF4: IMAGE
SYNC: Running post-install script for image version ndtrc
CP1 [12/10/14 17:50:25.510] 0x00264518 00000000 GlobalRouter SW INFO Slot SF4: Backup
image updated with primary. Rebooting with backup image
CP1 [12/10/14 17:50:25.510] 0x00264503 00000000 GlobalRouter SW INFO Slot SF4: IMAGE
SYNC: rebooting
CP1 [12/10/14 17:50:25.579] 0x00264503 00000000 GlobalRouter SW WARNING Slot SF4: Reset
due to image sync upgrade.
CP1 [12/10/14 17:50:25.811] 0x00010756 0040000b.24 PERSISTENT SET GlobalRouter HW
WARNING Module 9090SF in slot SF 4 is non-operational
CP1 [12/10/14 17:51:25.069] 0x00248547 09200003.1 DYNAMIC CLEAR Global SF-APP INFO
SYSTEM HAS TWO BMEs - Switch Fabric Redundancy Control In Place !!!
CP1 [12/10/14 17:51:25.208] 0x00010750 00000000 GlobalRouter HW INFO Module 9090SF in
Installing a new chassis
October 2015
Installing the Avaya VSP 9000
91