Table 18: Output power specifications
Parameter
Specification at input voltage
90–140 VAC
Specification at input voltage
185–275 VAC
Maximum main output power
1,200 W
2,000 W
Maximum main output current
22 A
37 A
Auxiliary output voltage / power
5 VDC / 3.75 W
5 VDC / 3.75 W
Output voltage set-point
54 VDC
54 VDC
Mean time between failures (See
note 1.)
400,000 hours
400,000 hours
Note 1: Per telcordia SR-332, 25 C, full load, method 1, case III
Component input power
The following table provides input power specifications for the Virtual Services Platform 9000
components.
Important:
The Virtual Services Platform 9010 reserves the following power requirements:
• 80 watts (W) each for the primary and secondary Control Processor (CP) modules
• 70 W each for the 9095 Switch Fabric (SF) modules located in slots 1 and 4
• 1,900 W for a pair of 9010CM cooling modules that operate at full speed (Virtual Services
Platform 9010 chassis only)
The Virtual Services Platform 9012 reserves the following power requirements:
• 80 watts (W) each for the primary and secondary Control Processor (CP) modules
• 70 W each for the 9090 SF modules located in slots 1 and 4
• 150 W each for the two IO cooling modules, either two 9012FC cooling modules used with
first generation modules or two 9012FCHS cooling modules used with first or second
generation modules (Virtual Services Platform 9012 chassis only)
• 65 W each for the two SF cooling modules (Virtual Services Platform 9012 chassis only)
Table 19: Component input power
Modules
Component
Total input power (watts)
Thermal output rating
(BTU/hour)
Both VSP 9010 and
VSP 9012
9080CP Central
Processor Module
80
273
9048GT I/O module
350
1,194
9048GB I/O module
340
1,160
Table continues…
Component input power
October 2015
Installing the Avaya VSP 9000
99