Chapter 11
Avaya W310 Command Reference Guide
281
set port redundancy-intervals
User level: privileged, supervisor.
Use the
set port redundancy-intervals
command to configure the two timers
that control redundancy switchover:
•
Minimum interval between switchovers
—Minimum time (in seconds) between the
failure of the primary port link and switchover to the secondary (backup) port.
•
Switchback interval
—Minimum time (in seconds) that the primary port link must be up
(following failure) before the system switches back to the primary port.
If the switchback interval is zero, the system never switches back. If it is one,
switchback occurs immediately after the primary port link returns.
Syntax:
The syntax for this command is:
set port redundancy-intervals <min-time-between-switchovers>
{<switchback-interval> | none}
Example:
Syntax
Description
<min-time-between-
switchovers>
Minimum time (in seconds) between the failure of the primary
port link and switchover to the secondary (backup) port.
<switchback-interval>
Minimum time (in seconds) that the primary port link must be
up (following failure) before the system switches back to the
primary port.
If the switchback interval is zero, the system never switches
back. If it is one, switchback occurs immediately after the
primary port link returns.
none
The system switches back only if the secondary link fails.
W310-1#
set port redundancy-intervals 100 20
Summary of Contents for W310
