Installing the Avaya WLAN Outdoor Access Point WAO9122
9
Snug all of the components together as shown, but leave the RJ45 connector protruding.
Tighten the sealing nut lightly, making sure that the RJ45 connector is rotated so that it
will seat easily in the connector body later.
Plug the RJ45 connector into the port on the bottom of the WAO 9122,
making sure that its
tab clicks in place for a secure connection
.
Seat the RJ45 connector correctly in the connector body.
Note the slotted track in the connector ring on the bottom of the AP and the matching
tabs inside the connector ring in the waterproof connector assembly, below. Screw the
assembly onto the WAP's connector ring so that they mate securely.
Snug all the sections of the assembly together a final time and tighten the sealing nut on
the end to 5kg but not more than 8kg torque force to insure a water tight fit.
Summary of Contents for WAO9122
Page 4: ......