Installing the Avaya WLAN Outdoor Access Point WAO9122
4
.
Install the metal bands through the holes in the mounting
bracket.
Note that the photos below show a different mounting
bracket. The steps for installation are identical, however.
Hand tighten the Band-It strap through the pole mounting
bracket, thread it through the strap buckle and then bend
the strap back.
Using the Band-It tool, place the tool onto the strap.
Rotate the Band-It tool so that it can pull the excess strap
through the buckle and turn the crank until the strap is
very tight.
Once the strap is satisfactorily tight, rotate the Band-It tool
back so that the strap cannot slide back through the
buckle.
Summary of Contents for WAO9122
Page 4: ......