AP MAC : 00:1B:4F:6C:01:00
..........
Radio 1
Channel : Automatic Adjustment
Power : Automatic Adjustment
..........
Radio 2
Channel : Automatic Adjustment
Power : Automatic Adjustment
...........
-------------------------------------------------------
......
......
5. Run the
config-sync
command to make Auto-RF fully operational:
WC8180#wireless controller config-sync
6. (Optional) You can perform additional Auto-RF verification by reviewing the
databases used by Auto-RF:
• Verify that RF Scan is working properly and collecting neighbor information:
WC8180#show wireless security wids-wips rf-scan
• Check the neighbor APs detected, both domain and non-managed APs:
WC8180#show wireless ap neighbor-ap
• Check specific neighbor relations detected by APs:
WC8180#show wireless rrm neighbors all
Managing Auto-RF operations
CLI reference:
WC8180#wireless auto-rf ?
Auto-rf actions
channel-plan Perform auto-rf channel plan actions
power-plan Perform auto-rf power plan actions
WC8180#wireless auto-rf channel-plan ?
a-n 802.11 a/n radio frequency band
bg-n 802.11 b/g/n radio frequency band
WC8180#wireless auto-rf power-plan ?
start Run proposed power adjustmnent algorithm
About this task
This following procedure is used to manage automatic radio frequency functionality.
Procedure
1. Enter Privileged mode of the CLI.
2. Use the command
wireless auto-rf channel-plan {a-n | b/g-n}
start
to run the channel adjustment algorithm.
ACLI reference for the Wireless LAN (WLAN) 8100
Avaya WLAN 8100 CLI Reference
August 2013 57
