Avayon DXP-1000 G2, Instruction Manual

 USING YOUR 

DXP-1000 G2

Once you have your player properly connected to your TV, or to your TV and amplifier, you can begin to play 
discs immediately. However, you may wish to customize your video and audio experience by selecting various 
options using the on-screen menus. Setup of these options is explained in the following sections. 

 1.  How to Play a Disc

Switch on the power 

Push the Power button on the front panel.  

Setup the basic system connections 

Once you have completed your basic system connections, ensure that you can observe the AVAYON screen on 
your TV. If you do not, visually check your cable connections and ensure that the correct settings have been 
selected on your TV for an external device like your player.  

Load a disc 

Press the OPEN/CLOSE button        on the remote, or the OPEN/CLOSE button on the front panel to open the disc 
tray. Load a disc into the tray and press the OPEN/CLOSE button again to close the disc tray. (Be sure to place the 
disc’s label side up.)         

Automatic Play 

The player will take several seconds to read the disc data, display the disc type logo at the left upper corner of the 
TV screen, and then start playing automatically. (MP3 discs take longer to upload data on SMART NAVI Menu when 
loading.) 

If a Disc Menu is displayed on the screen, do the following: 

1. Press the  

►

  button to start playing, or 

2. Press            cursor on the remote control to select the desired item and then press the ENTER button to confirm. 

NOTE:

  A different kind of Disc Menu may be displayed on the TV screen depending on the design and 

production of the disc. 

 2.  How to Use the Memory Card Reader and USB Port

The DXP-1000 G2 comes with a front-panel memory card reader, as well as a USB port. These features allow you 
to playback image and audio files directly from MMC, MS, and SD memory cards, as well as from USB flash drives 
and MP3 players.  
 

NOTE:

  Before connecting or disconnecting a USB device, ensure that there is no disc in the disc tray. 

Make sure that your USB device is adequately powered (if required) to work properly and is switched on and ready 
BEFORE you turn on the DXP-1000 G2. 
 

When a USB device or memory card is connected, you will be presented with the same menu structure as you 
would if you using a CD/DVD. 

NOTE:

  Avayon tries very hard to achieve the highest compatibility; however we cannot guarantee that all 

USB devices and memory cards will work properly due to their designs and variety.  

16