2. PICTURE SETUP
The unit’s TV output color is selectable to
PAL
or
NTSC
IMPORTANT
If the TV set is NOT multi-video system, and the following is observed on
the TV screen it could be a result of wrong color system matching with the
TV set:
Picture is distorted
Picture is black and white, no color.
Picture is not full screen, or border part of picture bas been blocked.
The DVD Player is set to NTSC system output as default, if you are not playing in the
U.S.A. or in PAL system, please change the output system of the unit by the steps below.
If the above problem happens:
1. Set the TV set’s system to the proper setting, or
2. Change the DVD unit’s output system setting as following:
1. Press ‘SETUP’ on remote control,
2. Go to ‘PREFERENCE’
3. Select the ‘TV TYPE’ MULTI, NTSC or PAL.
If the above steps DO NOT fix the problem, see TROUBLESHOOTING.
13
Summary of Contents for DXP-1000
Page 13: ...3 REMOTE CONTROL 11...