Important:
Parts of this scooter are heavy. You may require assistance to carry out this
procedure.
Assemble in reverse order.
Do not transport the vehicle with the occupant aboard
NOTE: If you wish to transport your vehicle without dismantling, use a strong
pair of ramps and always read the instructions before use. Remove the seat
and fold down the tiller. Check the opening of the car is large enough to take
the height of the vehicle.
Transporting the Quingo Classic & Plus
page 20
Remove basket pull upwards Use the backrest adjustment lever to
This may be slightly stiff fold seat as shown
To remove the seat pull the revolving
seat lever up, turn the seat & lift.
(Caution this is heavy)
Remove the rear cover by lifting
upwards. This is attached with Velcro
When removing the rear cover the
lighting cable must be detached.
Press the small plastic locking trigger
inwards and separate the cable